Model Designation; Accessories; Table 5-1 Eam Accessories - Siemens APACS+ Installation And Service Instruction

SD39EAM-1r4
5

Model Designation

Refer to the following to decode the model designation:
39EAM B A N Enhanced Analog Module (EAM)
│ │ └── Electrical Approvals: N = Not Required
│ └──── Design Level: A = Current Design
└────── 4-mation Version: B=2.00, 2.01, 2.02, 2.03, 2.06, C=3.00 and later
5.1

Accessories

Table 5-1 lists the available EAM accessories.
PART NUMBER
16114-97
16114-12
16056-468
16056-562
(single piece number)
September 2005
Table 5–1 EAM Accessories
DESCRIPTION
Marshalling Utility Panel (Figure 2-4)
Includes installed wire ducts and DIN rails for mounting APACS marshalled
termination assemblies. For installation in an APACS MODULPAC cabinet.
Blank Utility Panel (Figure 2-4)
Similar to above but without installed ducts and rails. For installation in an
APACS MODULPAC cabinet.
End Stop Kit. End Stops prevent the sliding of an EAM Marshalled
Termination Assembly along the mounting DIN rail.
Mounting Ear (Figure 2-6). Provides for a flat mounting of the EAM
Marshalled Termination Assy. Four pieces required. Refer to section 2.6.2.
Model Designation
5-1