Ford RANGER Owner's Manual page 183

The selector can also be used to return to
radio reception when you have been
listening to another source.
Station Tuning Control
Seek Tuning
Select a waveband and briefly press one
of the seek buttons. The unit will stop at
the first station it finds in the direction you
have chosen.
Manual Tuning
1. Select RADIO mode and then
MANUAL TUNE.
2. Use the left and right arrow buttons to
tune down or up the waveband in small
increments or press and hold to
increment quickly, until you find a
station you want to listen to.
Scan Tuning
Scan allows you to listen to a few seconds
of each station detected.
1. Select RADIO mode.
2. Short press the SCAN/AS button, the
radio will automatically scan up the
selected waveband.
3. Short press the SCAN/AS button
again to continue listening to a station.
Station Preset Buttons
This feature allows you to store your
favorite stations, they can be recalled by
selecting the appropriate waveband and
pressing one of the preset buttons.
1. Select a waveband.
2. Tune to the station required.
Ranger (TKD, TKE) Vehicles Built From: 01-10-2014, enAUS, Edition date: 10/2014
Audio System
3. Press and hold one of the preset
buttons until you hear a beep. When
the station has been stored, the preset
number along with the station name
or frequency is displayed for
confirmation.
You can repeat this on each waveband and
for each preset button.
Note: When you drive to another part of the
country, stations that broadcast on
alternative frequencies and are stored on
preset buttons, may be updated with the
correct frequency and station name for that
area.
Autostore Control
This will store up to a maximum of the six
strongest signals available, either from the
AM or the FM waveband and overwrite the
previously stored stations. You can also
store stations manually in the same way
as other wavebands.
1. Select RADIO mode.
2. Long press the SCAN/AS button.
3. When the search is complete, sound is
restored and the strongest signals are
stored on the autostore presets.
181