Automatic Climate Control - Ford RANGER Owner's Manual

Selecting air to windshield will
automatically switch the A/C on and select
the outside air.
AUTOMATIC CLIMATE
CONTROL
The system controls the temperature,
amount and distribution of the air flow
automatically and adjusts them according
to the driving and weather conditions. A
short press of the AUTO button once
switches on the auto mode.
Note: When in AUTO, ensure that the
temperature is set to the desired level 22°C
(71°F) is preferred).
Note: If the climate control is operated,
information relating to this system is
displayed in the information display. See
Information Displays (page 56).
Note: Avoid adjusting the settings when
the vehicle interior is extremely hot or cold.
The automatic climate control adjusts to
the current circumstances automatically.
For the system to function properly, the side
and center vents should be fully open.
Note: The sunload sensor is located on top
of the instrument panel. Do not cover the
sensor with any objects.
Note: The in car temperature sensor is
located behind the grill below the air
distribution control. Do not cover the grill
with any objects.
Note: At low outside temperatures, when
the system is in auto mode, the air flow will
be low and the air stream will be directed
to the windshield and the side windows as
long as the engine is cold.
Ranger (TKD, TKE) Vehicles Built From: 01-10-2014, enAUS, Edition date: 10/2014
Climate Control
Air distribution control
E132685
A
B
C
To adjust air distribution, press the desired
button. The combination of settings that
can be selected are A, B, C, A and C and
B and C.
Blower
E132686
65
Windshield
Face level
Footwell
A
B
C