Safety Instructions In Operation, Inspection And Maintenance; Personal Protection - Famsun TCXT Series Operation Manual

Spouting permanent magnet

Table of Contents

manager immediately in case of any equipment damage or missing parts by

transportation.

I n installation, allow enough clearances around the equipment for future maintenance

and parts replacement.

P rior to installation, all equipment parts must be kept in their original packages. The

equipment parts and packing boxes should be properly covered and stored in places

sheltered from rain, sunlight and damp.

1.5 Safety instructions in operation, inspection and maintenance

T he operation, inspection, repair and maintenance of the equipment shall be carried

out only by the trained technical personnel according to the applicable specifications

provided together with the equipment. Electric installation shall be performed only by

professionals per the relevant electric safety standards in their practice.

D o not operate when the safety protection device and access door are open. On the

other hand, do not open the access door until the equipment comes to full stop.

If any trouble occurs to the safety protection device of the access door, please repair or

replace it at once.

W hen the safety guards or access door have to be opened or the safety devices have

to be disassembled in order to inspect, adjust, repair and maintain the equipment or

replace the parts, required safety action plans must be in place prior to such

operations.

D o not do such work as inspection, maintenance and cleaning etc. until the material

flow has completely stopped going through the spouting magnet.

W hen performing maintenance and inspection work with a welder or other tools that

can generate sparks, take strict safety precautions against dust explosion and

combustion (refer to "Explosion protection").

I f any parts are found as damaged, please repair or replace them immediately.

A ll the mechanical equipment manufactured by FAMSUN Co., Ltd includes safety

devices that are consistent with modern technical frontier and generally effective

safety rules prior to leaving the factory so that the customers can use the equipment

in accordance with the regulations.

I f the operators employed lack of communication skills of reading and writing, the

owner holds the responsibility to explain to them clearly where danger exists and

warn them that special attention should be exercised.

1-3

Table of Contents