Honda WT20XK1 Manual page 77

WT20X • WT30X • WT40X
3. FLOAT LEVEL HEIGHT
Place the carburetor in an upright position and measure the
distance between the top of the float and the carburetor body
when the float just contacts the seat without compressing the
valve spring.
If the height is out of specification, replace the float.
WT20XK1
WT20XK2
WT20XK3
WT20XK4
WT30XK1
Standard
float height
WT30XK2
WT30XK3
WT40XK0
WT40XK1
WT40XK2
12.2-15.2 mm (0.48-0.60 in)
13.7 mm (0.54 in)
11.9-14.5 mm (0.47-0.57 in)
13.2 mm (0.52 in)
11.9-14.5 mm (0.47-0.57in)
13.2 mm (0.52 in)
CARBURETOR
10-7