Table of Contents
Advertisement
DVR-9404~9408~9416
Chapter 2 Software Installation
2.1 Install Main System Application
Before starting the installation of your Main System Application, you should check if all hardware
components were installed properly. It is important that you complete the hardware installation in
Chapter one first before proceeds to the software installation procedures below.
1. Insert GV-Series CD into the CD-ROM drive of your GV-System and run Setup.exe in the
CD-ROM root directory.
2. A setup dialog box will appear with 7 options for you to choose, select GeoVision Main System
and click [Next].
3. Select the model of your system in the product type dialog box and click [Next].
4. If the model you selected is GV-200, GV250, GV-600 and GV-800, then another product select
dialog box will appear. Choose the actual model and click [Next] to proceed to the next step.
Page 12
FOR ADDITIONAL QUESTIONS CONTACT TECHNICAL SUPPORT TEAM @ 1 (866) 392-MACE
Mace Security Products
Advertisement
Table of Contents
