Setup Remote View System - Mace DVR-9404~9408~9416 User Manual

DVR-9404~9408~9416
Chapter 6 Remote Monitoring System
6.1.2 Setup Remote-View System
Modem Connection Setup
Please make sure that both remote view workstation and GV-System has modems installed
properly. The GV-System will only supports external modems, the internal modem card will
not work with this setup.
1. Click the [Network] button of the GV-System main screen and enable [Modem Server]
from the menu.
2. Click on [Preference] then select [Configure Modem] from the sub-menu and the following
window will appear. In the drop-down list select the proper modem in use.
3. Click the [Connect] button from Remote-View System's menu bar, select Dial-Modem
from the submenu and the following window will appear.
4. Input the telephone number of the GV-System you wish to connect to in [Phone Dial]
column. (this column will memorized 10 previously entered telephone numbers.)
5. Enter an authorized user's ID and passwords then click [Make Call] button. To login
successfully the [Connect Status] column should appear with the following message...
Make Call – XXXXXX
Line Hang Up!
Line Reply...
Login...
Page 76
FOR ADDITIONAL QUESTIONS CONTACT TECHNICAL SUPPORT TEAM @ 1 (866) 392-MACE
Mace Security Products