Table of Contents
Advertisement
DVR-9404~9408~9416
[HotLine Option]
The HotLine Notice Interval allows you to specify the time interval between each notification.
For example, if the interval time you specified is 5 minutes, then the system will calls to your
phone/pager every 5 minutes if motion still persist. The system will stop calling when no
motions are detected.
[HotLine Attach Audio Message]
You can specify how many times to repeat the audio message when the system notifies you
by Telephone.
Camera / Audio Install
Click
following window will appear.
[Camera]:
Activate: Click on the [Activate] button and a camera list menu will appear. You'll find a
B/W:
[Start Up]:
You may set the channel number for the camera to be activated and start up the function in
next program execution.
Note
If you are using 16Cam / 4Port then Start Up, Camera Scan will disclose the desired
Camera number by the quantity of Port so as to scan camera function.
FOR ADDITIONAL QUESTIONS CONTACT TECHNICAL SUPPORT TEAM @ 1 (866) 392-MACE
[System Configure] button and select "Camera / Audio Install" option and the
check box before each camera; click on the check box to activate or
deactivate the cameras.
When the picture is jammed due to installation of both color and
monochrome cameras on the system, select B/W to change all video display
to monochrome. (Available only on GV-200)
Mace Security Products
Chapter 3 Main System Application
Page 41
Advertisement
Table of Contents
