Beko BBFDA 070 User Manual page 13

1 Safety precautions
>9000Btu/h and <=12000Btu/h
units: 17m
2
>12000Btu/h and
<=18000Btu/h units: 26m
>18000Btu/h and
<=24000Btu/h units: 35m
•Reusable mechanical
connectors and flared joints are
not allowed indoors.
(EN Standard Requirements).
•Mechanical connectors used
indoors shall have a rate of not
more than 3g/year at 25% of the
maximum allowable pressure.
When mechanical connectors
are reused indoors, sealing parts
shall be renewed. When flared
joints are reused indoors, the
flare part shall be re-fabricated.
(UL Standard Requirements)
•When mechanical connectors
are reused indoors, sealing parts
shall be renewed. When flared
joints are reused indoors, the
flare part shall be re-fabricated.
(IEC Standard Requirements)
Split type air conditioner / User Manual
•Mechanical connectors used
indoors shall comply with
ISO 14903.
2
European disposal
guidelines
2
This marking shown on the
product or its literature, indicates
that waste electrical and eletrical
equipment should not be mixed
with general household waste.
This appliance contains
refrigerant and other potentially
hazardous materials. When
disposing of this appliance, the
law requires special collection
and treatment. Do not dispose of
this product as household waste
or unsorted municipal waste.
When disposing of this appliance,
you have the following options:
Correct disposal
of this product
(Waste electrical
& Electronic
equipment)
13 / 196 EN