BABY MONSTERS Apolo Manual page 7

To Install the Infant Car Seat to Easy Twin 4
G. Attach with Easy Twin 4 stroller.
Adapter
Use Easy Twin 4 car seat adapter which is separately supplied with 1 left piece and 1 right piece.
To Lock the Infant Car Seat
Always secure the infant car seat to Easy Twin 4 stroller by using the carry handle lock.
The lock will be engaged by pushing both buttons under the round knob at both ends of carry
handle then lower the carry handle down.
IMPORTANT: Pull up on the car seat gently to check that it is securely locked to the adapter
and that the adapter is securely locked to the stroller before putting your child in it.
To Release the Infant Car Seat
Push the buttons under both ends of carry handle then lifting the carry handle to A position to
release the car seat from stroller.
CAUTION:
- Ensure that you follow the instructions from both stroller and the infant car seat for a
proper usage.
- DO NOT allow anyone who has not read the instruction manual to install or use this
child restraint.
- The maximum weight of infant car seat on Easy Twin 4 stroller is 9kg.
- Always install the car seat
to lower side [#1] of Easy
Twin 4 stroller when only
1 car seat is in use.
- DO NOT lower the carry handle to c. position (its lowest position) when
- DO NOT lower the carry handle to c. position (its lowest position) when use 2 Apolo
use 2 Apollo infant car seats on Easy Twin 4 stroller at the same time, it
infant car seats on Easy Twin 4 stroller at the same time, it might cause danger to
might cause danger to babies fingers.
babies fingers.
a.
a.
b.
b.
c.
c.
#1
a.
a.
b.
b.
c.
c.
#2
#1
English