Table of Contents
Advertisement
Quick Links
Installation,
Operation and
Service Information
Throughout this manual
statements indicating
precautions necessary
to avoid equipment failure are
referenced in a Note. Statements
indicating potential hazards that
could result in personal injury or
property damage are referenced
in a CAUTION! box.
Illustrations in this manual are for
reference only, as actual product
may vary.
Installation
and Operation Manual
Modular MediaFilter
Ambient Collectors
Models HA-1A, HA-1B, HA-2A, and HA-2B
This manual is property of the owner. Leave with the unit when set-up and
start-up are complete. Donaldson Company reserves the right to change design
and specifications without prior notice.
™
– Horizontal Series –
IOM AD3029501
Revision 2
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Donaldson Torit MediaFilter Horizontal Series
Summary of Contents for Donaldson Torit MediaFilter Horizontal Series
- Page 1 CAUTION! box. This manual is property of the owner. Leave with the unit when set-up and start-up are complete. Donaldson Company reserves the right to change design Illustrations in this manual are for and specifications without prior notice.
- Page 2 Donaldson dust collection equipment is not equipped with fire extinguishing or explosion protection systems. • DO NOT allow sparks, cigarettes, or other burning objects to enter the hood or duct of any mist control equipment.
-
Page 3: Table Of Contents
This manual contains specific precautionary statements relative to worker safety. Read thoroughly and comply as directed. Discuss the use and application of this equipment with a Donaldson Torit representative. Instruct all personnel on safe use and maintenance procedures. Data Sheet... -
Page 4: Description
Donaldson Company, Inc. Description Purpose and Intended Use The Modular MediaFilter –Horizontal Series Airborne mist is small droplets of liquid that are ambient collectors are designed to collect airborne suspended in the air. Modular MediaFilter – mist such as oil- or water-soluble and synthetic Horizontal Series collectors are commonly used in coolant from machining operations. -
Page 5: Rating And Specification Information
Modular MediaFilter – Horizontal Series – Ambient Collectors Rating and Specification Information lift and turn latches lift-off hinge clean-air outlet dirty-air inlet 1 /2-i NP dr i motor and blower access Modular MediaFilter –Horizontal Series i f i o i t c i r e r i a t l... -
Page 6: Operation
Donaldson Company, Inc. Operation allows contaminant loading throughout the life of During normal operation, contaminated air enters the filter. As mist particles coalesce and form large the unit through the open inlet located on the back droplets, the droplets run down into the bottom of of the unit. -
Page 7: Inspection On Arrival
Reference the product ordered. Specification Control drawing. 6. Report incomplete shipments to the delivery carrier and your Donaldson Torit Unit Location representative. 1. When hazardous conditions or materials are 7. Remove crates and shipping straps. Remove... -
Page 8: Electrical Wiring
Donaldson Company, Inc. Electrical Wiring Rigging Instructions Suggested Tools & Equipment CAUTION! Crane or Forklift Socket Wrenches, metric • Electrical installation must be Slings, Spreader Bars, End Wrenches, metric performed by a qualified electrician and Clevis Pins Level and comply with all applicable... -
Page 9: Standard Equipment
Modular MediaFilter – Horizontal Series – Ambient Collectors Standard Equipment Ceiling Mount 1. Position the unit as close to the mist source as 6. Insert rod with washer and hex nut through the possible allowing optimum extraction air ceiling mount bracket from the bottom up. movement. -
Page 10: Magnehelic Gauge
Donaldson Company, Inc. Magnehelic Gauge The Magnehelic is a differential pressure gauge 6. Mount the gauge and bracket assembly to the supporting structure using two self-drilling used to measure the pressure difference between screws. the clean- and dirty-air chambers and provides a visual display of filter change requirements. - Page 11 Modular MediaFilter – Horizontal Series – Ambient Collectors 1/8-in NPT x 90° male elbow clean-air plenum drill location Magnehelic gauge high-pressure port low-pressure port two, 1/8-in NPT adapters mounting bracket #6-32 x 1/4-in mounting screws plastic tubing two, 1/8-in NPT pipe plugs two, self-drilling screws support structure 1/8-in NPT x 90°...
-
Page 12: Electrical Connection
Donaldson Company, Inc. Electrical Connection All the Modular MediaFilter —Horizontal Series 1. Mount the control box in a convenient, Ambient collectors must be equipped with a accessible location. customer-supplied safety disconnect with short 2. Make the wiring connections to the fan motor... -
Page 13: Preliminary Start-Up Check
Modular MediaFilter – Horizontal Series – Ambient Collectors Preliminary Start-Up Check Optional Equipment 1. Check all electrical connections for tightness Drain Collection Container and contact. 2. Check for and remove all loose items in or near 1. Install the drain collection container during the inlet and outlet of the unit. -
Page 14: P-Trap Or Y-Strainer Installation
Donaldson Company, Inc. P-Trap or Y-Strainer Installation First-Stage Filters 1. Install the 1 1/2-in NPT pipe as shown below. An optional 4-in impinger with a 1-in aluminum mesh filter, or a 4-in high efficiency filter are 2. Plumb the P-trap to a receptacle or install a available for heavy liquid-load applications. - Page 15 Modular MediaFilter – Horizontal Series – Ambient Collectors First-Stage Filter Cleaning HEPA Filter 1. Remove the first-stage filter. 1. Open the HEPA module’s access door. 2. Replace 4-in multi-vee filter as necessary. 2. Pull the two clamping handles up to lower the filter from its seal.
- Page 16 Donaldson Company, Inc. P-Trap Maintenance P-Trap with Y Strainer, Screen Cleaning 1. Place a suitable container under the P-trap, turn 1. Place a suitable container under the screen the collector OFF, and remove the pipe plug. clean-out valve, turn the collector OFF, close the P-trap valve, then open the screen clean-out 2.
- Page 17 Modular MediaFilter – Horizontal Series – Ambient Collectors P-Trap with Y Strainer, Screen Removal Drain Collection Container 1. Close the P-trap valve. 1. Turn unit OFF. 2. Unscrew the screen cap and pull the screen out. 2. Remove the container by unscrewing the container from the cap.
- Page 18 Donaldson Company, Inc. Split Taper™ Bushing Mounting Instructions Many fans are furnished with split taper bushings Split Taper Bushing for mounting the impeller to the shaft. When properly assembled, the bushings grip the hub with ® BROWNING Split Taper Bushed a positive clamping action.
-
Page 19: Troubleshooting
Modular MediaFilter – Horizontal Series – Ambient Collectors Troubleshooting i f i s ' r a l i l l a . t l l l a , r e t s i f r i i t c i t c s t l e l t . - Page 20 Donaldson Company, Inc. c i f f r i i l e l l a t c i l a i . s i s r i s - t t l i t l i e t l . s r...
-
Page 21: Service Notes
Modular MediaFilter – Horizontal Series – Ambient Collectors Service Notes i v r... - Page 22 Donaldson Company, Inc. Service Notes, continued i v r...
-
Page 24: Warranty
Such a refund will be in the full extent of Donaldson’s liability. Donaldson shall not be liable for any other costs, expenses or damages whether direct, indirect, special, incidental, consequential or otherwise.
Need help?
Do you have a question about the Torit MediaFilter Horizontal Series and is the answer not in the manual?
Questions and answers