Fixed-Bail Mounting The Device - Garmin ECHOMAP UHD2 5X Installation Instructions Manual

Fixed-Bail Mounting the Device

NOTICE
If you are mounting the bracket on fiberglass with screws, it is recommended to use a countersink bit to drill a
clearance counterbore through only the top gel-coat layer. This will help to avoid cracking in the gel-coat layer
when the screws are tightened.
1 Select the mounting hardware appropriate for the bail-mount bracket and your mounting surface.
2 Using the bail-mount bracket as a template, mark the pilot holes through the screw holes.
3 Using a drill bit appropriate for the mounting hardware, drill the four pilot holes.
4 Using the selected mounting hardware , secure the bail-mount bracket to the mounting surface.
5 Loosely install the bail-mount knobs .
6 Place the device in the bail-mount bracket.
7 Tighten the bail-mount knobs.
3