Advertisement
Assembly Steps
Insert the output controller RD6006 and
keep clamped in the mounting hole
Wiring
Connect the Ground wire of power socket (E) to the Ground
wires of switching power supply (〨) with the double color wire
Wiring
08
Connect the FireWires(L) of power
switch and switching power supply with the brown wire
Wiring
12
Wiring
09
Connect the FireWires(L) of power switch and power
socket with the brown wire
Wiring
13
Fan
Wiring
10
Connect the Neutral wires(N) of switching power supply
and power socket with the blue wire
14
Wiring
NOTE:
Connect the power
1. The wiring requests a high level of expertise, non-professionals must not
line of the fan to the
operate, otherwise, there is a risk of fire and explosion.
output terminals of
2. Please check and switch the input power 110V or 220V before power on
the switching power
supply, and insert the
to avoid damage
2 pin power supply
wire of the fan into
the holder
11
15
Assemble the upper cover plate
and fix with the screws 11 ,Mount
the pads with the screws 12
If any problem, feel free to contact us.
Website: www.uctronics.com
Email: support@uctronics.com
Advertisement
