Uctronics U6180 Instruction Manual

UCTRONICS MACHINE LEARNING KIT
Based on Raspberry Pi Pico
SKU: U6180
Instruction Manual
INTRODUCTION
UCTRONICS Machine Learning kit is designed to o er a compact hardware base for more
possibilities of the Raspberry Pi Pico. The on-board mini breadboard and expanded available
GPIO pins get you started in learning the electronics and circuits easily. More importantly, the
kit packs a camera, a display, microphone to help you run the examples of Tensorflow Lite
Micro tiny machine learning, which has been ported to the RP2040.
This manual includes how to set up the camera and run the 2 pre-trained TensorFlow Lite Micro
examples, Person Detection and Wake-Word Detection. You can also build, train and deploy
your models on it.
SPECS
Camera Module
HiMax HM01B0, Up to QVGA (320 x 240)@60fps
Screen
0.96 inch LCD SPI Display (160 x 80, ST7735)
Operating Voltage
Breadboard
Dimension
5V
35x47mm, 170 points
90x70mm
SCHEMATIC VIEW
01 4 x programmable buttons
03 Display
05 Power indicator
07 Socket for HM01B0 and HM0360 camera
09 Socket for Pico
11 Reserved interface for Wifi and Bluetooth module
07
08
09 10
05 04
HARDWARE SETUP
1. Align and insert the Pico header into the socket.
2. Align and insert the HM01B0 camera header into the socket, keep the camera outwards.
3. Plug the USB end of the Micro USB cable to the computer, then press and hold the
02 Mini Breadboard
04 Reset button
06 Microphone
08 Socket for SPI camera
10 Pico GPIO expander
11
06
03
01
02