Table of Contents
Advertisement
BIOS SETUP
PNP/PCI Configuration
This option configures the PCI bus system. All PCI bus systems on the
system use INT#, thus all installed PCI cards must be set to this value.
CMOS Setup utility – Copyright © 1984-2001 Award Software
PNP OS Installed
Reset Configuration Data
Resources Controlled By
IRQ Resources
DMA Resources
PCI/VGA Palette Snoop
PNP OS Installed
Select Yes if the system operating environment is Plug-and-Play aware
(e.g., Windows 95). The options: Yes and No.
Reset Configuration Data
Normally, you leave this field Disabled. Select Enabled to reset Extended
System Configuration Data (ESCD) when you exit Setup if you have
installed a new add-on and the system reconfiguration has caused such a
serious conflict that the operating system cannot boot. The options:
Enabled and Disabled.
Resources Controlled by
The Award Plug and Play BIOS can automatically configure all the boot
and Plug and Play-compatible devices. If you select Auto, all the interrupt
request (IRQ) and DMA assignment fields disappear, as the BIOS
automatically assign them. The options: Auto and Manual.
PCI/VGA Palette Snoop
Enabling this item informs the PCI VGA card to keep silent (and to
prevent conflict) when palette register is updated (i.e., accepts data
without responding any communication signals). This is useful only
when two display cards use the same palette address and plugged in the
PCI bus at the same time (such as MPEQ or Video capture). In such case,
PCI VGA is silent while MPEQ/Video capture is set to function
normally.
40
PnP/PCI Configurations
No
Disabled
Manual
Press Enter
Press Ente
Disabled
IB770 User' s Manual
Item Help
Menu Level
Select Yes if you are using a
Plug and Play capable
operating system. Select No if
you need the BIOS to configure
non-boot devices.
Advertisement
Chapters
Table of Contents
