Standard Cmos Setup - IBT Technologies IB770 User Manual

BIOS SETUP

Standard CMOS Setup

"Standard CMOS Setup" allows you to record some basic hardware
configurations in your computer system and set the system clock and
error handling. If the Embedded Little Board is already installed in a
working system, you will not need to select this option. You will need to
run the Standard CMOS option, however, if you change your system
hardware configurations, the onboard battery fails, or the configuration
stored in the CMOS memory was lost or damaged.
CMOS Setup utility – Copyright © 1984-2001 Award Software
Date (mm:dd:yy)
Time (hh:mm:ss)
IDE Primary Master
IDE Primary Slave
IDE Secondary Master
IDE Secondary Slave
Drive A
Drive B
Video
Halt On
Base Memory
Extended Memory
Total Memory
↑↓→Move
Enter:Select
Help
F5:Previous Values
At the bottom of the menu are the control keys for use on this menu. If
you need any help in each item field, you can press the <F1> key. It will
display the relevant information to help you. The memory display at the
lower right-hand side of the menu is read-only. It will adjust
automatically according to the memory changed. The following describes
each item of this menu.
Date
The date format is:
Day : Sun to Sat
Month : 1 to 12
Date : 1 to 31
Year : 1994 to 2079
To set the date, highlight the "Date" field and use the PageUp/ PageDown
or +/- keys to set the current time.
30
Standard CMOS Features
: Thu, May 18 2000
: 00 : 00 : 00
[None]
[None]
[None]
[None]
[1.44M, 3.5 n.]
[None]
[EGA/VGA]
[All errors]
640K
48128K
49152K
+/-/PU/PD:Value
F6:Fail-Safe Defaults
IB770 User' s Manual
Item Help
Menu Level
Change the day, month,
Year and century
F10:Save ESC:Exit
F7:Optimized Defaults
F1:General