Installing The Memory (Sodimm) - IBT Technologies IB770 User Manual

INSTALLATIONS

Installing the Memory (SODIMM)

The IB770 has a 144-pin SODIMM socket. The SODIMM socket
supports a maximum total memory of 256MB in SDRAM single side
type. The memory capacities supported are 64MB, 128MB and 256MB.
Installing and Removing DIMMs
To install the SODIMM , locate the memory slot on the little board and
perform the following steps:
1. Hold the SODIMM so that the two keys of the DIMM align with those
on the memory slot.
2. Gently push the SODIMM in an upright position until the clips of the
slot close to hold the DIMM in place when the SODIMM touches the
bottom of the slot.
3. To remove the SODIMM, press the clips with both hands.
Top View of SODIMM Socket
Note: Do not add or replace the memory chips installed on the board
without consulting the manufacturer.
6 IB770 User' s Manual