J14: Cpu Fan Power Connector - IBT Technologies IB770 User Manual

ATX Power ON Switch: Pins 7 and 17
This 2-pin connector connects to the power switch. When
pressed, the power switch will force the system to power on.
When pressed again, it will force the system to power off.
Power LED: Pins 11 - 13
The power LED indicates the status of the main power
switch.
Reset Switch: Pins 9 and 19
The reset switch allows the user to reset the system without
turning the main power switch off and then on. Orientation is
not required when making a connection to this header.
Hard Disk Drive LED Connector: Pins 10 and 20
This connector connects to the hard drive activity LED on
control panel. This LED will flash when the HDD is being
accessed.

J14: CPU Fan Power Connector

J14 is a 3-pin header for a CPU fan. The fan must be a 12V fan.
Pin # Signal Name
1 Rotation
2 +12V
3 Ground
IB770 User' s Manual
INSTALLATIONS
Pin # Signal Name
11 Power LED
12 No connect
13 Ground
21