Table of Contents
Advertisement
BIOS SETUP
Power Management Setup
The Power Management Setup allows you to save energy of your system
effectively. It will shut down the hard disk and turn off video display after
a period of inactivity.
CMOS Setup utility – Copyright © 1984-2001 Award Software
ACPI Function
Power Management
Video Off Method
Standby Mode
HDD Power Down
Soft-off by PBTN
Power-Supply Type
PWRON After PWR-Fail
Thermal Duty Cycle
RI Resume IRQ
RTC Resume
IRQ Wakeup Events
VGA
LPT & COM
HDD & FDD
PCI master
Power Management
This field allows you to select the type of power saving management
modes. The options are as follows:
Min. Power Saving
Max. Power Saving
User Define (default)
Video Off Method
This field defines the Video Off features. There are three options.
V/H SYNC + Blank: blank the screen and turn off vertical and horizontal
scanning.
DPMS: allows the BIOS to control the video display card if it supports
the DPMS feature.
Blank Screen: This option only writes blanks to the video buffer.
Standby Mode
After the selected period of system inactivity, the fixed disk drive and the
video shut off while all other devices still operate at full speed.
38
Power Management Setup
Enable
User Define
DPMS Supports
Disabled
Disabled
Instant -off
Auto
off
Disable
3
Disabled
Press Enter
OFF
LPT/COM
ON
OFF
Minimum power management
Maximum power management.
Each of the ranges is from 1 min. to 1hr.
Except for HDD Power Down which
ranges from 1 min. to 15 min.
IB770 User' s Manual
Menu Level
Advertisement
Chapters
Table of Contents
