Go to
https://support.lenovo.com/partslookup
replacement parts:
Rubber foot
Remove the lower case
Make sure the following FRUs (or CRUs) have been removed.
"Remove the rubber foot" on page 28
Step 1.
Remove nine screws. Pry up the latches and then remove the lower case.
Figure 4. Remove nine screws
Screw specifications
M2 x L7.6
M1.6 x L2.9
M2 x L2.6
Go to
https://support.lenovo.com/partslookup
replacement part:
Lower case
Remove the battery pack
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 29
Step 1.
Disconnect the cable from the system board. Then, remove five screws and then remove the
battery pack.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
to look up the Lenovo part numbers of the following
Number of screws
2
3
4
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
29