Page 1
IS242 Rev.00 06/08/2020 B72/DGS Smagnetizzatore Demagnetizer Istruzioni originali IT - Istruzioni ed avvertenze per l’installatore EN - Instructions and warnings for the installer DE - Anweisungen und Hinweise für den Installateur FR - Instructions et consignes pour l’installateur ES -...
Page 2
B72/DGS Bi-adesivo Double-sided adhesive solo con / only for BAFS05 CTRL B72/DGS (dalla versione / from version P4.10) 11 12 13 14 15...
Page 3
3) Al richiudersi della sbarra l'elettroblocco si attiva nuovamente: azionare ora lo sblocco della barriera, e verificare che dopo La scheda B72/DGS è un dispositivo con la funzione di eliminare qualche secondo la sbarra sia libera di essere mossa a mano il magnetismo residuo causato dall'alimentazione ininterrotta 4) Bloccare la meccanica nuovamente.
Page 4
2) Give an opening command and check that the drive is preceded by the release of the arm by the electro lock (LED L1 blinks briefly). The B72/DGS card is a device with the function to eliminate the 3) When the barrier closes again, the electro lock is activated...
Page 5
Allgemeine Einstellung der Parameter Sicherheitshinweise Die Platine B72/DGS wird über den Parameter 29 der Steuereinheit CTRL gesteuert. Achtung: Eine falsche Montage kann 29 00 Art der Elektrosperre auswählen schwere Schäden zur Folge haben. Lesen Sie die Anleitungen vor der Montage des Produktes Magnetische Elektrosperre vom Typ “Saugknopf”...
Page 6
écrite préalable de ROGER TECHNOLOGY. 1. Appliquer le bi-adhésif à l'arrière du boîtier de la carte B72/DGS. 2. Fixer le boîtier à l'intérieur du BOÎTIER de la centrale de commande CTRL côté borniers ENCODEUR, LED LIGHT, SERVICE CLIENTS ROGER TECHNOLOGY: LOCKS.
Page 7
La tarjeta B72/DGS es un dispositivo con la función de eliminar el 4) Bloquear la mecánica nuevamente. magnetismo residual causado por la alimentación ininterrumpida del electrobloqueo cuando la barrera está...
Page 8
2) Dê um comando de abertura e verifique se o acionamento é precedido pela libertação da barra pelo bloqueio elétrico (o LED A placa B72/DGS é um dispositivo com a função de eliminar o L1 pisca brevemente) magnetismo residual causado pela alimentação ininterrupta 3) Quando a barra fecha-se novamente, o bloqueio elétrico é...
Need help?
Do you have a question about the B72/DGS and is the answer not in the manual?
Questions and answers