Related Manuals for Unfinished Furniture of Wilmington T-4272 A Series
Summary of Contents for Unfinished Furniture of Wilmington T-4272 A Series
- Page 1 ASSEMBLY INSTRUCTIONS : 42X72X84X96 TABLE Description : T-4272XXA AND T-4272XXB Item No. ITEM NO.: T-4272XXA AND T-4272XXB Printed in Vietnam ISSUED JUL 13, 2018 THIS ITEM IS PACKED IN TWO CARTONS - 1 -...
-
Page 2: Before Assembly
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. -
Page 3: Hardware List
PART LIST T-4272XXB When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts: Description Sketch Description Sketch Cross Bar Supporter Base HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: Description Sketch... - Page 4 STEP 1 Use the Allen key (6) to loosen the bolts and washers, and then remove support rails from bottom of the table top (A) as shown below. Take out two table leaves from the carton box, then re-attach support rails to the table top as shown below.
- Page 5 STEP 2 Insert crossbar (B) and supporters (C) into the bases (D) as shown below. Attach crossbar (B) to bases (D) with bolts (2) and u-washers (5) as shown below. Tighten with Allen key (6). Attach supports (C) to crossbar (B) with bolts (2), and washers (3) and (4) as shown below. Tighten with Allen key (6).
- Page 6 STEP 4 Unlock the table top (A) from both sides underneath the top as shown below. Pull the two parts of the table top apart. STEP 5 Put two leaves on support rails underneath the table top as shown below. ITEM NO.: T-4272XXA AND T-4272XXB Printed in Vietnam ISSUED JUL 13, 2018...
- Page 7 STEP 6 Push the table top closed. Lock the mechanism underneath two sides of the table top as shown below. STEP 7 Unlock the table top from both sides underneath the top as shown below. Pull the two parts of the table top apart.