BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased.
HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: Description Sketch Description Sketch Short bolt Medium bolt ( M6x40mm) (M6x30mm) Long bolt Wood Screw (M6 x 80mm) (M4 x 35mm)
Page 4
STEP 2 Attach front leg (C) to the leg (D) with bolts (1), and washers (5) and (6), as shown below. Tighten with Allen key (7). Place stretchers (E) between legs (C) and (D), attach with screws (4) as shown below. Tighten with a screwdriver.
Page 5
STEP 4 Attach the seat (F) to top of the seat frame (B) with screws (4). Tighten with a screwdriver.. ITEM NO : S-202SW Printed in Vietnam ISSUED JAN 30, 2015 - 5 -...
Need help?
Do you have a question about the S-202 SW and is the answer not in the manual?
Questions and answers