Crestron DigitalMedia 3 Series Supplemental Manual page 16

Restore Default Settings
The DMPS3-300/200-C can be restored to its default factory settings from the front panel. Users
can restore only the audio settings or restore the audio settings, source names, output names,
and function names.
Restore audio settings only:
1. Access the Control Setup menu as described on page 8.
2. Press the
3. Press the
4. To restore the factory default audio settings, press the
Restore all of the factory default settings:
1. Access the Restore Defaults menu as described above.
2. Press the
Cancel the restoring of any default settings:
1. Access the Restore Defaults menu as described above.
2. To cancel all of the above restore operations, press the
12 •
DMPS3-300-C-AEC/300-C/200-C: 3-Series DigitalMedia Presentation System 300
 
or buttons until Defaults is displayed on the LCD, and press ENTER to
display the Restore Defaults screen.
Restore Defaults Screen (Audio Settings Only)
 
or buttons until Aud. Settings only is displayed on the LCD, and press
ENTER.
Reset All Audio? Confirmation Screen
displayed on the LCD, and press ENTER. To cancel, press the
is displayed on the LCD, and press ENTER.
 
or buttons until All settings is displayed on the LCD, and press ENTER.
The Reset all settings? confirmation screen is displayed.
Reset All Settings? Confirmation Screen
 
Press the or buttons until Yes is displayed on the LCD, and press ENTER to
restore the audio settings, source names, output names, and function names to their
factory defaults. To cancel, press the
and press ENTER.
displayed on the LCD, and press ENTER. The restore operation is cancelled.
 
or
 
or buttons until No is displayed on the LCD,
 
or
Supplemental Guide – DOC. 7591B
buttons until Yes is
 
or buttons until No
buttons until Abort is