Kia Seltos Manual page 195

Features of your vehicle
When the headlamps of an
oncoming vehicle or the tail
lamps of a vehicle in front is
covered with dust, snow, or
water
When the headlamps on an on-
coming vehicle are OFF, but the
fog lamps are ON)
2. When High Beam Assist is
adversely affected by an external
condition. Such examples may
include:
When the vehicle's headlamps
have been damaged or not
repaired properly
When the vehicle headlamps
are not aimed properly
When the vehicle is driven on a
narrow curved road or rough
road
When the vehicle is driven on an
uphill road or downhill road
When only part of the vehicle in
front is visible on a crossroad or
curved road
When there is a traffic light,
reflecting sign, flashing sign or
mirror
When the road conditions are
bad such as being wet or cov -
ered with snow
When a vehicle suddenly
appears from a curve
When the vehicle is tilted from
a flat tyre or being towed
When Lane Safety indicator illu -
minates
When the light from the
oncoming or front vehicle is not
detected because of exhaust
fume, smoke, fog, snow, etc.
When the front window is covered
with foreign matters such as ice,
dust, fog, or is damaged
3. When the forward visibility is
poor. Such examples may include:
When the headlamps of an
oncoming vehicle or a vehicle in
front is not detected due to
poor outside visibility (smog,
smoke, dust, fog, heavy rain,
snow, etc.)
When the windscreen visibility
is poor
WARNING
The function may not work
around 15 seconds after starting
the vehicle or the initialization or
rebooting of the front view cam -
era.
Do not attempt to disassemble
the front view camera without
the assistance of an authorised
Kia dealer/service partner techni -
cian.
If the front view camera is
removed for any reason, the
function may need to be re-cali -
brated. We recommend that the
function be inspected by an
authorised Kia dealer/service
partner.
Lighting
4
4 103