Infotainment system
NOTICE
The screen image in this manual is
an example. Check your system
screen for the exact vehicle name
and Bluetooth device name.
The default passkey is 0000 .
It may take a whilst for the sys -
tem to connect with the device
after you permit the system to
access the device. When a con -
nection is made, the Bluetooth
status icon appears at the top of
the screen.
You can change the permission
settings via the mobile phone s
Bluetooth settings menu. For
more information, refer to your
mobile phone s user guide.
To register a new device, repeat
steps 1 to 3.
If you use the automatic Blue -
tooth connection function, a call
may be switched to the vehicle s
Handsfree when you are taking on
the phone near the vehicle whilst
the vehicle s engine is on. If you do
not want the system to connect
with the device automatically,
deactivate Bluetooth on your
device.
When a device is connected to the
system via Bluetooth, the device s
battery may discharge faster.
Connecting a paired device
To use a Bluetooth device on your
system, connect the paired device
to the system. Your system can
connect with only one device at a
time.
1. From the control panel, press the
[PHONE] button, and then select
Phone settings ▶ Paired devices.
If there is no connected device,
press the Call/Answer button
on the steering wheel.
2. Turn the [TUNE] knob to select
the device to connect, and then
press the knob.
If another device is already con -
nected to your system, discon -
nect it. Select the connected
device to disconnect.
NOTICE
If a connection ends because a
device is out of the connection
range or a device error occurs, the
connection will be restored auto -
matically when the device enters
the connection range or when the
error is cleared.
Depending on auto connection
priority, connection to a device
may take time.
Disconnecting a device
If you want to stop using a Blue -
tooth device or connect another
Bluetooth
5
5
25