Kia Seltos Manual page 194

Features of your vehicle
operating, High Beam Assist will
turn off and the high beam will
be on continuously.
2)If the light switch is pulled
towards you when the high
beam is off, the high beam will
turn on without High Beam
Assist cancelled. When you let
go of the light switch, the lever
will move to the middle and the
high beam will turn off.
3)If the light switch is pulled
towards you when the high
beam is on by High Beam
Assist, the low beam will be on
and High Beam Assist will turn
off.
4)If the light switch is placed to
the headlamp position (
High Beam Assist will turn off
and the low beam will be on
continuously.
When High Beam Assist is operating,
the high beam switches to low beam
in the following conditions.
When the headlamp of an on-
coming vehicle is detected.
When the tail lamp of a vehicle in
front is detected.
When the headlamp or tail lamp
of a motorcycle or a bicycle is
detected.
When the surrounding ambient
light is bright enough that high
beams are not required.
When streetlights or other lights
are detected.
4 102
When the light switch is not in the
AUTO position.
When High Beam Assist is off.
When vehicle speed is below 30
km/h (19 mph).
Warning light and message
When High Beam Assist is not work -
),
ing properly, the warning message
will come on for a few seconds.
After the message disappears, the
master warning light (
minate.
We recommend that you take your
vehicle to an authorised Kia dealer/
service partner and have the func -
tion checked.
CAUTION
The function may not operate nor -
mally if any of the following condi -
tions should occur:
1. When the illumination from an
on-coming vehicle or a vehicle in
front is dim. Such examples may
include:
OSP2049114E
) will illu -
Lighting