Command Tab; Gsm Modem Operation - Tescom i-com Series User Manual

In the ALARM REPORT TYPE section the alarm reporting type is selected to determine how modem
conveys the alarms to the users.
"Only SMS" option sends an SMS to the phone number that was set when the alarm occurred.
"Only GPRS" option sends an alarm report to the servers, which they have IP and PORT values when
the alarm occurs.
"Both SMS and GPRS" also performs with the option of either reporting process when alarms occur.

Command Tab

Sms and gprs settings on the other tabs can be tested in this tab

4.GSM Modem Operation

GSM Modem starts regular operation by connecting modem to UPS with CC05 RS232 cable(green cable) after
configuration process. SIM card should be inserted before powering GSM modem.
GSM modem automatically choses proper communication protocol for respetive UPS model. GSM modem supports
TX100, TX300 and TX301 UPS communication protocols.
GM-3 models have internal battery unit. If GSM modem has external power, batteries will charge(if needed). If
external power is cut off, device will operate on battery energy. This feature allows modem to send SMS to user even
if batteries are empty. After powering GM-3 modem, switch the ON/OFF switch to "ON" position.
Connect power adapter to GM-2 modem during stand alone operation.
15