General Adjust Tab - Tescom i-com Series User Manual

You can set the IP and PORT numbers of the server for GPRS reporting. When entering the IP and PORT
numbers, the gap should be written to 0.
For example : 89-250-192-38 should be written 089-250-192-038.
After sending report , for taking report confirmation from the server, there are two options that are
"Request" and "Not Request". If the response is not necessary, "Not Request" is recommended.
When the "READ FROM MODEM" button is clicked, it will read server IP and PORT which is registered
from modem.When the "TEST GPRS" button is clicked, it will send test gprs report to the server.

General Adjust Tab

General Settings tab, as shown in the following window "ALARM REPORT TYPE" and "USER
PASSWORD" setting can be made.
14