Epson TM-m30 User Manual page 35

5
Edit the logo image.
Setting
Layout
Rotate by 180 Degrees
Grayscale
Paper width
Brightness
6
After editing the logo image, click the [Register] button to save the logo.
Click the [Test Print Registered Logo] button to test-print the registered logo. Click the [Unregister]
button to cancel the registration of the logo.
7
When setting a logo in multiple positions, repeat steps 2 to 6.
Specifies [Left], [Center], or [Right] for the logo position.
When this is selected, the logo is rotated 180 degrees. Only the image is rotated,
the logo insertion position does not change.
Specifies the grayscale setting. Selects [Multi-tone] or [Monochrome].
Sets the paper width. Select [80 mm] or [58 mm] as appropriate for the printer
paper size.
Moves the slide bar to set the brightness.
Chapter 3 Using the Printer Driver
Description
3
35