Table of Contents
Advertisement
4) Port information when using Ethernet port
Not applicable
2.3. Device Settings
The following explanation is about the settings for TM-U330x.
2.3.1. Usable Device Specific Settings
For the TM-U330x, the following device specific settings are settable by the
SetupPOS utility. For the detail, please refer to the Section 2 of "EPSON OPOS
ADK MANUAL APPLICATION DEVELOPMENT GUIDE POSPrinter (TM Series)".
Tab
General
Paper
Bitmap
Color Bitmap
Status Log
Options
Printing Properties
*1
The settings can be changed when using a connection other than serial.
2.3.2. Options
"NearEndSensor" check box
For the models, which are supported NearEndSensor function as an option,
marking the check box could set NearEndSensor function.
Disable panel buttons
Assume print complete when data output finishes
Homogenize Error Codes
Ignore firmware version check
Output complete timeout
Paper Type
Paper Width [mm]: LineWidth [dot]: LineCharsList
TMFlogo...
Halftone: Method
Halftone: Brightness
Color: Primary
ERROR
OFFLINE
Log file name (full path name)
Maximum file size [KB]
NearEndSensor
Receipt Characters per Line
Receipt Line Spacing [dots]
CharacterSet [CodePage Number]
3
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-U330x)
Version 3.00 Feb. 2019
Settings
*1
Advertisement
Table of Contents
