Hoisting; Storage - HOLLISTER-WHITNEY GLV-40S1 Series Instruction Manual

G L V - 4 0 S 1

Hoisting

The machine weighs about 4500 pounds (2040 kg). When removing the machine from the
pallet, it must be lifted using the lifting holes provided at the bottom of the machine.
When lifting the machine, use a spreader beam or other suitable rigging device to pull straight
up on the lifting holes.
WARNING
Use only the hoisting method shown when lifting the machine! Do not use
any other machine component to lift the machine! Lifting the machine by
any other component will result in damage to the machine or possible
failure of the component resulting in the machine falling from the hoisting
system!
Follow all the necessary precautions to avoid damage to the machine or
risk to personnel when moving or hoisting the machine.

Storage

During storage in a warehouse or on the elevator job site, precautions must be taken to protect
the machine from dust, dirt, moisture, metal shavings and temperature extremes.
For short term storage, place the machine in a warm, dry and clean environment.
Protect the machine from harsh weather conditions and temperature variations that can lead to
condensation.
Protect from dust and metal shavings. Metal dust and shavings can be attracted into the
machine by the magnets.
For longer term storage, follow the recommendations above plus; place the machine in a
sealed, waterproof enclosure. Add a dehydrating packet that is sized for the enclosure's
volume and humidity level.
B U L L E T I N
# 1 1 9 6 G E A R L E S S
Figure 2
Page 3-2
Rev. A - 04/01/2022
T R A C T I O N M A C H I N E