Setting The Sdi Delay; Assigning A Site Id; Assigning The Modbus Address; Setting The Sonde Time And Date - Hach Surveyor 4a User Manual

Sonde Setup

3.5 Setting the SDI Delay

1. Highlight SDI:Delay and press
2. Enter the delay of the SDI address (5–994 seconds) using the cursor keys and the
3. Press

3.6 Assigning a Site ID

This feature will assigns a description of the site where the Sonde is located.. The Site ID uses a
maximum of 15 letters, numbers, and blanks.
1. Highlight Site ID and press
2. Enter the new Site ID using the cursor keys and the
3. Press

3.7 Assigning the MODBUS Address

1. Highlight MODBUS:Address and press
2. Enter the new Modbus address (1–247) using the cursor keys and then the
3. Press

3.8 Setting the Sonde Time and Date

Note: When using a DataSonde 3 or Recorder, this option is displayed as "D/T:MDY/HMS".
1. Highlight Date-Tim:MDY/HMS and press
2. Set the date (month, day, year) and time (hours, minutes, seconds) for the Sonde using the
3. Press
3.9 Turning the AutoLog On/Off
1. Highlight Autolog:On/Off and press
2. Choose to turn the circulator on or off using the cursor keys and the
3. Press
Setting the SDI Delay
Page 16
key.
when complete.
DONE
<<<Space>>> and press
when complete.
DONE
when complete.
DONE
cursor keys and the
SELECT
when complete.
DONE
(zero) to disable the autolog or select 1 to enable the autolog.
when complete.
DONE
.
SELECT
.
SELECT
. To delete an error, press the
SELECT
.
SELECT
.
SELECT
key.
.
SELECT
key. To add space, highlight
SELECT
key.
BACKSPACE
SELECT
SELECT
SELECT
key.
key. Select 0