Section 3 Sonde Setup; Selecting Parameters; Turning The Circulator On/Off; Assigning The Sdi-12 Address - Hach Surveyor 4a User Manual

Section 3
The Surveyor 4a can setup the Sonde (Series3 or Series4, only). The items displayed in the
Sonde Setup submenu depends on the Sonde connected to the Surveyor 4a. Some of the choices
and options are not available on some Series 3 Sondes. See the Series 3 Operating Manual for
more information on setup.
Security Level-2 is required to change Sonde Setup features.
1. Connect the Surveyor 4a to a Sonde.
2. Press the
3. From the Main screen, select
4. Highlight the option to be configured. Sections

3.1 Selecting Parameters

This feature allows the setup of parameter setup options for the Sonde. The Surveyor 4a will
display the parameters included on the Sonde.

3.2 Turning the Circulator On/Off

Note: When using a DataSonde 3 or Recorder, this option allows the "stirrer" to be turned on of off.
1. Highlight Circltr:ON/Off and press
2. Choose to turn the circulator on or off using the cursor keys and the
3. Press
3.3 Turning the Audio On/Off
Note: When using a DataSonde 3 or Recorder, this option allows the "Buzzer" to be turned on of off.
1. Highlight Audio:On/Off and press
2. Choose to turn the audio on or off using the cursor keys and the
3. Press

3.4 Assigning the SDI-12 Address

1. Highlight SDI:Address and press
2. Enter the SDI address using the cursor keys and the
3. Press
Sonde Setup
button.
OFF/ON
displayed.
features.
(zero) to disable the circulator or select 1 to enable the circulator.
when complete.
DONE
disable the audio or select 1 to enable the audio.
when complete.
DONE
displayed on the bottom right-hand corner of the screen.
when complete.
DONE
> >
SETUP/CAL SETUP SONDE
3.1—3.9
.
SELECT
.
SELECT
.
SELECT
SELECT
. The Sonde Setup submenu will be
describes the Sonde Setup submenu
key. Select 0
SELECT
key. Select 0 (zero) to
SELECT
key. The SDI address status is
Sonde Setup
Page 15