Let's Get Started - Motorola MG8725 Quick Start Manual

LET'S GET STARTED

1. Turn off and disconnect any existing modems or routers on your network.
2. Connect coax cable that has active cable service to the modem's
COAX connector. Ensure that you have access to the bottom label
during setup and activation of the modem.
Note: You may use a coax splitter to share the cable connectivity with your
TV. Use a two-way splitter with a top frequency of 1,000 MHz or higher.
Please note this may reduce the device's performance.
3. Plug the MG8725 into a power outlet using the power adapter.
4. Wait for the online light (
and remain on for at least 1 minute. This process may take up to 15
minutes and the modem may reboot multiple times.
4
for 3.0, or for 3.1) to stop flashing