Table of Contents
Advertisement
Figure 2-3 Setup of LAN and WAN connections for this product.
3. Setup ADSL connection
Prepare a telephone cable for connecting this product to your ISP. Figure 2-3 illustrates the ADSL
connection.
4. Connecting this product with your printer
Use the printer cable to connect your printer to the USB printer port of this product.
5. Power on
Connecting the power cord to power inlet and turning the power switch on, this product will
automatically enter the self-test phase. When it is in the self-test phase, the indicators STATUS
will be lighted ON for about 10 seconds, and then STATUS will be flashed 3 times to indicate that
the self-test operation has finished. Finally, the STATUS will be continuously flashed once per
second to indicate that this product is in normal operation.
9
Advertisement
Table of Contents
