Table of Contents
Advertisement
PPPoE Service Name:
Optional. Input the service name if your ISP requires it.
Assigned IP Address:
Optional. Required by some ISPs. Once you finished the required configuration, you must click on the
"Save" button to save the configuration into Flash memory, and the reboot this device.
4.4.2 OAM Server
In this page, you can set the OAM feature for virtual channel.
First click on the Enable or Disable circle for the settings of OAM Function, Activation/De-activation,
Loopback, and Fault Management individually.
Then, click on the "Save" button to finish the configuration of the selected session.
Once you set the appropriate OAM settings on virtual channel, you can see the corresponding
up-to-date maintenance status by clicking the "Refresh AD/FM State" button in this page.
28
Advertisement
Table of Contents
