Table of Contents
Advertisement
If not using DHCP to get an IP address, input the information that the access point requires
in order to allow the wireless devices it controls access to the wired LAN. This will be the IP
address, Subnet Mask, Default Gateway, and, where needed, DNS 1 and 2.
Click Apply to accept changes.
LAN
This sets up the default numbers for the four octets for a possible private LAN function for
the access point. It also allows changing the default numbers for the LAN Subnet Mask. The
Local LAN port provides local access for configuration. It is not advisable to change the private
LAN address while doing the initial setup as you are connected to that LAN.
17
Advertisement
Table of Contents
