Table of Contents
Advertisement
to reset to factory settings, use the reset function available through the web-screen management
module, or keep pressing the reset button located at the bottom of the device for 5 seconds.
It has the following features:
•
Ethernet uplink WAN port
•
Local Ethernet LAN port (for configuration only)
•
Wireless (802.11b/g) interface
•
Power over Ethernet (PoE)
•
Above average operating temperature range for extreme environments
•
TKIP, AES-CCMP or WEP encryption (for AP mode); AES-ECB or 3DES (for bridging)
•
HTTPS/TLS secure Web
•
DHCP client
•
Access Point/Bridging/Repeater Mode
•
Adjustable Radio Power
•
MAC address filtering
•
Load Balancing
•
Rogue AP Detection
The following cryptographic modules have been implemented in the WAB-1000.
•
TKIP/AES-CCMP
•
AES-ECB for wireless (128/192/256 bit)
•
3DES for wireless (192 bit)
•
WEP
•
MAC-based authentication
•
Rogue AP detection
Wireless Basics
Wireless networking uses electromagnetic radio frequency waves to transmit and receive
data. Communication occurs by establishing radio links between the wireless access point and
devices configured to be part of the WLAN.
The WAB-1000 incorporates the 802.11b/g standard and the most state of the art encryption
for a very powerful and secure wireless environment.
2
Advertisement
Table of Contents
