Advertisement
Quick Links
M3093GX\DG\M3096G\GX\M3097G+\DG
Fi-4340C\Fi-4530C\Fi-4640S\M4097D\Fi-4750C\L\Fi-5750 SCSI
Step A: Required hardware.
To install these models you will need a Narrow SCSI 50-pin controller and six foot (maximum)
Narrow SCSI cable.
Step B: Removing the shipping bracket.
It is recommended that before you connect the scanner to your computer that you inspect the
scanner and remove the shipping bracket first.
Removing the shipping bracket: The flatbed scanner models typically come with a
factory installed shipping lock designed to protect the scanner during shipment. Before
the scanner can be used the shipping lock must be unlocked. Follow these instructions
to unlock the shipping bracket:
1. Slide the scanner to its side as shown in figure below.
2. Unscrew the retainer screw and remove the shipping bracket.
3. Place the shipping bracket in the "use position" slot and secure it with the retainer
screw (see figure below)
Place scanner back in its normal position
4.
Win2000\XP Installation Procedure
Rev050304A
Advertisement
Related Manuals for Adaptec M3093GX
Summary of Contents for Adaptec M3093GX
- Page 1 M3093GX\DG\M3096G\GX\M3097G+\DG Fi-4340C\Fi-4530C\Fi-4640S\M4097D\Fi-4750C\L\Fi-5750 SCSI Win2000\XP Installation Procedure Step A: Required hardware. To install these models you will need a Narrow SCSI 50-pin controller and six foot (maximum) Narrow SCSI cable. Step B: Removing the shipping bracket. It is recommended that before you connect the scanner to your computer that you inspect the scanner and remove the shipping bracket first.
- Page 2 3. Next scroll down to the drivers section, click on ASPI_v470 or higher and follow the prompts to download it. 4. Afterwards go to that folder and unzip the file to the default Adaptec\ASPI folder. For Win2000 go to start, run, browse to the Adaptec\ASPI folder, select ASPIINST.EXE and run it.
- Page 3 M3093GX\DG\M3096G\GX\M3097G+\DG Fi-4340C\Fi-4530C\Fi-4640S\M4097D\Fi-4750C\L\Fi-5750 SCSI Win2000\XP Installation Procedure one of the SCSI ports or turned on. If the scanner is not the last device on the SCSI chain, then the terminator should be removed or turned off before connecting to the next SCSI device.
- Page 4 Step G: Installing the STI-Twain driver for the Fi-4340C\Fi-4530C\Fi-4640S\M4097D\ Fi-4750C\L\Fi-5750. Special note: Use the ASPI-Twain driver for the M3093GX\DG\M3096G\GX\M3097G+\DG. 1. Create a new folder and name it Twain Download. 2. Next go to our Web page - www.fcpa.com...
- Page 5 M3093GX\DG\M3096G\GX\M3097G+\DG Fi-4340C\Fi-4530C\Fi-4640S\M4097D\Fi-4750C\L\Fi-5750 SCSI Win2000\XP Installation Procedure 12. In the ASPI Twain Download folder locate the setup.exe file and double click. Afterwards follow the prompts and reboot when finished. Step H: Installing Scandall21. 1. Create a new folder and name it Scandall Download.