RH Baby&child ALEXANDRA TUFTED TODDLER Instructions Manual
  1. Manuals
  2. Brands
  3. RH Baby&child Manuals
  4. Baby & Toddler Furniture
  5. ALEXANDRA TUFTED TODDLER
  6. Instructions manual

RH Baby&child ALEXANDRA TUFTED TODDLER Instructions Manual

Hide thumbs

Advertisement

Table of Contents

Made in Vietnam
Distributed in the U.S.A. by:
Restoration Hardware Baby & Child
10640 Harrel St. Suite B
Mira Loma, CA 91752
www.rhbabyandchild.com
Distributed in Canada by:
Restoration Hardware Canada, Inc.
1500-1055 West Georgia Street
Vancouver, British Columbia V6E4N7
WARNING: Read all instructions before
assembling this product. KEEP
INSTRUCTIONS FOR FUTURE USE.
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact us first. You can also order parts by writing to the address above. Include the
product model number, color, and a brief description of the part. Call 1-800-762-1751.
C ARE AND CLEANING
DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning. Dust often using a clean, soft, dry cloth. Blot spills immediately and wipe
with a clean damp cloth. If the crib is to be stored, store in a cool dry place and carefully package all original hardware to protect from loss.
TOOLS AND INSTALLATION
Tools Necessary: Allen Key (included)
NOTE: It may be easier to assemble product with two people.
NOTE: When inserting bolts, turn clockwise until tight. Then loosen
completely assembled, return to each bolt and tighten. Use wax or soap on all bolts to facilitate assembly
1
3
-
of a turn. After crib is
2
4
Page 1 of 7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ALEXANDRA TUFTED TODDLER and is the answer not in the manual?

Questions and answers

Related Manuals for RH Baby&child ALEXANDRA TUFTED TODDLER

Summary of Contents for RH Baby&child ALEXANDRA TUFTED TODDLER

  • Page 1 Made in Vietnam Distributed in the U.S.A. by: Restoration Hardware Baby & Child 10640 Harrel St. Suite B Mira Loma, CA 91752 www.rhbabyandchild.com Distributed in Canada by: Restoration Hardware Canada, Inc. 1500-1055 West Georgia Street Vancouver, British Columbia V6E4N7 WARNING: Read all instructions before assembling this product.
  • Page 2 IMPORTANT SAFETY INFORMATION FOR TODDLER & DAY BEDS WARNING: ENTRAPMENT / STRANGULATION HAZARD Infants have died in toddler beds from entrapment and strangulation. Failure to follow these warnings and the assembly instructions could result in serious injury or death. NEVER use bed with children under 15 months. NEVER place bed near windows where cords from blinds or drapes may strangle a child.
  • Page 3 WARNING: ADULT ASSEMBLY ONLY, OWING TO THE PRESENCE OF SMALL PARTS, SHARP POINTS AND EDGES. TODDLER BED: THE MINIMUM AGE SHALL NOT BE LESS THAN 15 MONTHS AND THE MAXIMUM WEIGHT SHALL NOT BE GREATER THAN 50LBS. (22.7 KG). THE MATTRESS INTENDED FOR USE ON THE BED SHALL BE A FULL-SIZE CRIB MATTRESS HAVING MINIMUM DIMENSIONS OF 51-5/8 IN.
  • Page 4 ASSEMBLY INSTRUCTIONS STEP #1. CRIB DISASSEMBLY STEP #1.1: Remove the front rail panel of the crib by loosening all the bolts installed, as in DETAIL A. STEP #1.2: Lay down the crib and remove the bolts underneath the metal brackets holding the stabilizer rails as in DETAIL B.
  • Page 5 STEP #2. TODDLER RAIL ASSEMBLY. NOTE: For the toddler bed, you can replace the front side rail panel with a toddler rail, or you also can replace both side rail panels with two toddler rails. STEP #2.1 DETAIL D On inside face of both end panels have a cavity for the hook which corresponds to the hooks on both ends of the toddler rails .
  • Page 6 STEP #3 MATTRESS SUPPORT HEIGHT ADJUSTMENT DETAIL F NOTE: If mattress supports is not in the lowest position. STEP #3.1 loosen and remove all bolts (BB) on both sides of the frame of mattress support. STEP #3.2 Re-install the bolt on the third hole of the frame through the hole on the arm support.
  • Page 7 STEP #4 INSTALLATION OF STABILIZER RAILS INTO THE END PANEL DETAIL H STEP #4.1 On inside face of both end panels are pre-installed metal brackets, designed to hold the stabilizer rails. Set both ends of the stabilizer rails into brackets, as illustrated in DETAIL H. STEP #4.2 Once the stabilizer rails are set, hold the mattress support and lay down the toddler bed then fasten the stabilizer rails...

Table of Contents