Settings Button - Function; Connection And Initial Setup; Inserting A New Fleece-Mat Roll - Red Sea ReefMat 1200 User Manual

Table of Contents

Advertisement

Available languages

Available languages

Connection and initial setup

Download and install the ReefBeat-App from the app Store or Google
Play as appropriate for your Smart Mobile Device (SMD).
If this is your first ReefBeat device you will need to set up an account
and add some details of your aquarium. If you do not have a permanent
internet connection set the aquarium to "Offline".
Set your ReefMat to AP mode by pressing the settings button for 5
seconds (until double blink). The indicator LED should be blinking.
Tap the Add Device button from the Device Manager page, select the
icon and follow the instructions in the app. This may take a few seconds.
If no devices appear on the list, check that the ReefMat is in AP mode
and/or refresh the page.
ReefBeat-App will now display a list of Wi-Fi networks and signal
strengths that are available to the ReefMat from its current location.
Select your preferred network and wait a few moments while the
ReefMat connects to it. The indicator LED will now be a solid red. Follow
the instructions on the app for initial settings.
If you have set the aquarium to Offline, select the "Direct Mode" option
at the top of the screen to skip the network connection. The indicator LED
will continue to blink as the ReefMat WI-Fi remains in AP mode.
Follow the instructions in the app for connecting the ReefMat to the
ReefBeat App and cloud. Then select the appropriate ReefMat model 500
or 1200 and select on which side of the ReefMat (Left or Right) you have
installed the drive-unit. It is best to come back to the App and confirm
that the fleece-mat roll has been installed after it has actually been
installed to avoid triggering any of the warning notifications.

Inserting a new fleece-mat roll

Remove all of the packaging material and assemble the new mat onto
the dispensing shaft as follows:
Disassemble shaft.
Insert the shaft into the cardboard core of the new roll.
Insert the chuck on the shaft and screw the side plate firmly into
position.
Red Sea ReefMat
®
ENG
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Reefmat 500

Table of Contents