Table of Contents
Advertisement
* When there is no available space remaining on
the CF card (when "0" (remaining frame count)
appears on the data display panel) (warning
beep).
* While writing to the CF card is in progress (in-
cluding compression).
* While the photographic mode (
being changed.
* Before exposure and focus have been deter-
mined.
* While an error message is displayed on the data
display panel.
*1
Be sure to always format CF cards in the cam-
era.
Camera-shake warning
When camera-shake occurs while a photograph is
being taken, the viewfinder LED will slowly blink
red.
Eye start
When eye start has been set to ON, operations up
to when the shutter button is pressed halfway (not
including focus) will be performed automatically
when you hold the camera and look through the
viewfinder.
) setting is
Auto power-off function (Auto shut-Off)
If the camera is not operated within a certain time
after batteries are loaded, the camera power will
be turned off automatically to conserve the batter-
ies. (When the power is turned off, depending on
the mode, the lens cover will close automatically or
the LCD monitor will turn off.)
The initial time setting for auto power-off is 3 min-
utes, which you can change in the setup mode.
Advertisement
Table of Contents
