Table of Contents
Advertisement
Display during playback
1. Set the mode select dial to Photo (
Note:
* When the power is already turned on with
Playback (
) or set up (SET UP), set the
mode select dial to Photo (
two modes and open the lens cover automati-
cally.
2. Press the power button.
The lens cover will open automatically.
3. Press the LCD monitor power button (LCD
POWER). The through image will appear on the
LCD monitor.
Caution
Always turn the LCD monitor on when selecting
the 4-frame continuous shooting mode.
4. Press the menu button once to enable menu
).
5. Press the select buttons ( ,
) to cancel these
6. Press the Set/Zoom button once.
selection ("Set Camera
screen). The through image will become a still
image.
the "Continuous shooting" menu. The 4-frame
continuous shooting menu icon will be displayed
highlighted in the upper center part of the LCD
monitor.
The 4-frame continuous shooting mode icon will
appear in the center of the LCD monitor.
Among the 4 modes (Standard →Low-speed→
Medium-speed→High-speed); the currently se-
lected mode will appear in highlighted. The
standard mode (not the continuous shooting
mode) will be displayed with the initial setting.
The intervals are low-speed (L;2 frames/sec.),
Exposure" setting
) and, change to
Advertisement
Table of Contents
