Konica Minolta Q-M200 Instruction Manual page 18

Konica digital still camera instruction manual
Hide thumbs Also See for Q-M200:
Table of Contents

Advertisement

Shooting a picture
Normally, photographs are taken with the subject
at distances of 0.3 m or more.
When the distance to the subject is 0.1 m to 0.3 m,
please refer to Macro (Close-up) Photography.
1. Make sure the CF card
has been inserted.
2. Set the mode select dial
on the top of the camera
to Photo (
).
Notes:
* When the power is already turned on with Play-
back (
) or set up (SET UP), set the mode
select dial to Photo (
modes and open the lens cover automatically.
) to cancel these two
3. Press the power button.
The lens cover will open automatically.
○ * Do not open the lens cover by hand.
4. Look through the view-
finder and compose the
scene. Use the autofocus
frame in the center of the
viewfinder to focus. Now
lightly press the shutter
button.
The
viewfinder
LED will light green and
exposure and focus will
be locked. When the subject being focused on
is not in the center of the viewfinder, follow the
instructions in Focus lock Photography in the
following section.
Lightly
press the
shutter
POWER
button.
Viewfinder LED
(green)

Advertisement

Table of Contents
loading

Table of Contents