Advertisement
April 2021
1
Installation
1.1
General considerations
1.1.1
Personnel
Only employ suitably qualified personnel who are familiar with the local
codes and practices and trained for gas detection maintenance.
Ensure that wiring is only performed and supervised by someone with
knowledge of electronics and, in particular, wiring installation.
1.1.2
Required tools
You can install the detector using general purpose common tools and
equipment.
Table 1-1: Tools
Tool
Alignment kit
Hex key 8 mm
Hex key 3/16 in.
Hex key 5/16 in.
Flat screwdriver 4 mm
Flat screwdriver 2.5 mm
Quick Start Guide
Function
Provides tools to install fine alignment tool.
Mounts the detector on the tilt mount.
Aligns the detector.
Screws ¾ stop plug.
Connects ground terminal.
Connects wires to the terminal block.
Quick Start Guide
5
Advertisement
