Caring For Your Shower; The Showerme App; Helpful Information - Elisa incite User Manual

Caring for your Shower

Over time, your shower may be affected by hard water scaling. To keep
your shower working effectively, we recommend that you clean your shower
regularly.
Your product should be cleaned using only a soft cloth and washing up
liquid. The bath system 'click clack' waste plug mechanism (if applicable)
should be kept clear of debris to ensure the plug maintains a watertight
seal. The plug can be unscrewed and removed to check and clean the
mechanism.
Cleaning the shower head
To reduce the need for chemical descaling in hard water areas, your shower
head incorporates a 'clear flow' system, whereby any scale build up can be
broken down by gently rubbing the flexible tips of the jets during use. This
procedure should be completed regularly, as often as once a week in some
hard water areas, as scale build up can affect the spray pattern and cause
the shower to perform poorly. Failure to descale the shower head can affect
the internal seals and may affect the warranty. Should descaling of the
head using a cleaning agent become necessary, remove the shower head
fully and immerse in a mild proprietary descaler (e.g. vegetable based or
plain white vinegar). Cleaning and maintenance should not be undertaken
by children without supervision by a person responsible for their safety.
DO NOT USE ABRASIVE CLEANERS. It is imperative that descaling is
carried out in accordance with the manufacturer's instructions,
substances that are not suitable for plastics and electroplated
surfaces must not be used.
Cleaning tip: to keep your shower effortlessly clean, we
recommend drying all shower components with a soft cloth after
use.
Changing water system?
If switching from a gravity-fed water system to a mains pressure system (e.g.
Combination boiler) you will need to change your SmartValve. Contact a
member of our Customer Service team for further information.
10

The ShowerMe App

HELPFUL INFORMATION - BEFORE YOU START
Download and open the ShowerMe app on your personal smart device
and follow the instructions to create Your Home profile before continuing
with this section. An instructional video and information on compatible
devices are available by visiting elisabathrooms.com
Refer to the troubleshooting section of this guide for guidance and
advice.
For Wifi set up, the SmartValve must be powered, but the shower must
not be in use.
Tapping on the settings symbol whilst in the shower tab
navigate you to a menu where you will find the Handy Hints section.
Setup guide
A walkthrough guide on setting up the
App and connecting the shower.
App support
INSTABUG
The ShowerMe app utilises the Instabug platform;
this tool can be used to:
Report an issue, suggest an improvement, or ask a
question. If you experience problems connecting
your shower, or with the app functions, then an
Instabug report can be raised. To trigger the
Instabug service either shake your smartphone
from side to side or tap on the message bubble
then simply follow the instructions.
Support on error messages and troubleshooting.
Voice activation
Once the ShowerMe app is set up and the shower
connected you can link your smart speaker.
View the step-by-step guide on how this is done.
will
ERROR MESSAGES
&
11