Hyundai HVF Series Instruction Manual page 7

� Fig. 2-2 Standard Circuit Diagram / 그림 2-2 표준 제어 회로도
M1 Motor Operating Mechanism
K1 Anti-Pumping Contactor
R1 Resistor
X0 Plug Connector
Note 1. Extended circuit spec & connection line number are
defined by user's request.
2. For the AC control circuit, the rectifier should be
attached on the standard circuit.
3. Standard contacts can be insufficient on the request
of the extended circuit.
Y1 Open Solenoid
Y2 2nd Open Solenoid
Y4 C.T. Operated Release
Y7 Under-Voltage Release
Y9 Closing Solenoid
주의
VCB
S1 Auxiliary Switch
S3 Limit Switch (K1 Control)
Limit Switch Supplied With the Lockout
S5 (Prevents Closing by Electrical Means When
Lock-Out Effective)
S6, S7 Cutout Switches
Limit Switches
S21, S22
(Interrupt Motor Circuit After Spring Charged)
S41, S42 Position Switch (Spring Charged Status Signal)
1. 추가 회로 및 접속은 고객의 요구에 따라 변경될 수 있습니다.
2. AC 제어전원에 대해서는 정류기가 추가됩니다.
3. 추가 회로 요청시 표준 접점이 부족할 수도 있습니다.
HVF/HAF Series
|
>> 7
진공차단기 취급설명서