Download Print this page
Klipsch KL-6504-THX Specification Sheet
Klipsch KL-6504-THX Specification Sheet

Klipsch KL-6504-THX Specification Sheet

In-wall flat-panel loudspeaker

Advertisement

Quick Links

In-Wall Flat-Panel Loudspeaker
Never before has Klipsch offered such
premium performance in an in-wall speaker.
You'll discover it delivers effortless dynamic
range and brings superior sound to larger
rooms thanks to its highly regarded THX
Select2 certification.
The KL-6504-THX employs four high-
output 5.25-inch fiberglass woofers for
powerful bass impact, while a 1-inch tita-
nium tweeter mated to a new symmetrical
pattern 90 x 90 square Tractrix® Horn
generates flat in-room frequency response
with high efficiency and low distortion.
This exclusive horn design also allows the
speaker to consistently deliver unbeatable
sound, whether it's installed horizontally or
vertically.
The KL-6504-THX's titanium horn-loaded
tweeter is mated to the woofers using
precision-voiced, high-definition crossover
networks, creating high sensitivity. This
makes the speaker easier to drive, so it
requires a lot less amplification power than
conventional designs.
Adding to its first-class sound, the KL-6504-
THX also has a premium look and feel with
its grille off, featuring a deluxe MDF baffle
with aluminum fascia. But when covered,
the speaker's paintable grille allows it to
blend in perfectly with any home décor.
All-new sure-grip mounting dogs offer even
pressure against drywall for long-term instal-
lation reliability.
Furthermore, the KL-6504-THX comes with
a lot of options. It is timbre matched to all of
our THX-certified products, so you can mix
and match for the discreet stereo or home
theater system that's just right for you.
KL-6504-THX
• THX Select2-certified for superior sound
• Horn-loaded for high efficiency and low distortion
• Sized for 42-inch and larger flat-panel TVs
• Easily mounts horizontally or vertically
• Maximum installation reliability
• Mix and match with our other THX products
S p e c i f i c a t i o n S
Bandwidth
Sensitivity
Nominal Impedance
Cross Over Frequency
Power Handling
Enclosure Type
Drive Components
Weight
Height
Width
Depth
Cutout Height
Cutout Width
Material
Finish
All specifications are subject to change without notice. ©2008
46 Hz - 20 kHz ± 3dB
92 dB
4 Ohms
250 Hz & 2100 Hz
150 Watts Cont. 600
Infinite Baffle - Front Flush with Wall
Two and a half way system utilizing
a 1" Titanium tweeter in a 4" 90x90
horn, and Two 5.25" Fiberglass
Woofers - THX Certified
18.3 lbs. / 8.3Kg
28.5 in / 72.4cm
8 in / 20.3cm
3.75 in / 9.5cm
27.25 in / 69.2cm
6.5 in / 16.5 cm
0.14 in / 3.5 mm ABS
White - Paintable
www.klipsch.com
1-800-KLIPSCH

Advertisement

loading