Printer Connection; Computer Connection; Checking The Led Indicators - 3Com WL-308 Manual

10 C 2: I
HAPTER NSTALLING THE

Printer Connection

Computer Connection

Checking the LED
Indicators
W B
ORKGROUP RIDGE
You can connect the bridge directly to a printer as shown below. Used this way,
the workgroup bridge allows you to place a printer in an area that is not wired
for Ethernet.
You can connect the bridge directly to a computer as shown below. Used this way,
the workgroup bridge can convert a desktop computer to a wireless computer.
This connection also allows you to configure a bridge before connecting it to
another device.
When the bridge is connected to power, two LEDs indicate activity as described
below.
LED Indicator Location
Wireless On the top of
association the bridge
Ethernet At the RJ45
connection Ethernet
connector
Description
On—Unit is receiving power.
Off—Unit is not receiving power.
Blinking—The unit is transmitting or receiving. Faster
blinking indicates faster transmission speed.
On—Unit is receiving power.
Off—The unit is not receiving power.
Blinking—Wired LAN traffic is detected. Faster blinking
indicates heavier traffic.